Talk to the NOC, IST hours — +91 75994 50220 support@bigdomainhost.com
Guide

How to take a TallyPrime backup and restore company data

One dead disk or ransomware infection can wipe out years of books if your Tally data lives on one PC. This guide shows how to back it up, keep copies off-site and prove they restore.

Short answer: Here is how to take backup in Tally Prime (Release 7.0 or later): press Alt+Y (Data), then Backup & Restore, then Backup. Choose the backup folder, select your companies or All Items, and press Enter. Restore from the same menu with Restore. Schedule daily backups, keep one copy on an unplugged drive or encrypted cloud storage, and test a restore every month.

How to take backup in TallyPrime

To take a backup in TallyPrime Release 7.0 or later, press Alt+Y (Data), choose Backup & Restore, then Backup. Check the Backup Data Path, pick one company or All Items, select End of List and press Enter. TallyPrime writes a backup file for each company to that folder. In Release 6.2 and earlier the same jobs sit one level higher, under Alt+Y (Data) > Backup and Alt+Y (Data) > Restore.

A backup only protects you if a copy lives somewhere other than the PC that holds your books, and if you have proved it restores. The rest of this guide covers both.

Tally backup: quick checklist

  1. Find where your company data lives (F1 Help > About > Location of Company data).
  2. Set a backup folder that is not inside the data folder.
  3. Take a manual backup through Alt+Y > Backup & Restore > Backup.
  4. Set a scheduled backup (Release 7.0 and later) for daily copies.
  5. Copy backup files off the PC: an external drive and encrypted cloud storage.
  6. Take an extra backup before month-end close and before return-filing work.
  7. Test a restore into a separate folder at least once a month.

Tally data location: where company data lives

Every company you create in TallyPrime is a folder named with a number, such as 100000, inside a parent folder called the company data path. Do not guess this path: it depends on how TallyPrime was installed and on any changes made later. To see it, press F1 (Help), choose About, and look at Location of Company data in the Data Information section.

To change the default folders in Release 7.0, press Alt+Y (Data) > Configuration. Three settings matter here:

SettingWhat it controls
Backup Data PathDefault folder for manual backups (also used for migration and repair)
Schedule Backup Data PathWhere scheduled backups go; TallyDrive by default
Company Data PathDefault folder that restored companies are written to

In Release 6.2 and earlier the screen is Alt+Y (Data) > Data Path Configuration, and the backup folder setting is called Company Backup Path. Point the backup path at a different disk or partition from the data path where you can, so one disk failure does not take both.

TallyPrime backup and restore: the built-in method

Manual backup

  1. Press Alt+Y > Backup & Restore > Backup.
  2. To change the Backup Data Path, press Backspace and type or select a folder, for example D:\TallyBackup.
  3. Under Company Name, pick a company, several companies, or All Items. You can also use Select from Drive or Specify Path for companies that are not loaded.
  4. Select End of List and press Enter.

The file is named after the company number, for example TDBK1800_100000. If a file of that name already exists, TallyPrime asks whether to overwrite it; if you decline, it adds a suffix such as _1. Companies protected with TallyVault need the vault password during backup and restore, so store that password somewhere safe and separate. A backup you cannot unlock is no backup.

Scheduled backup

Release 7.0 added scheduled backups. Press Alt+Y > Backup & Restore > Schedule Backup, set the path and companies, then choose a Backup Frequency (Once, Daily, Weekly or Monthly) and a time. Press F12 and enable Provide Method of Backup to choose Incremental (the default) or Full backups and to set No. of Restorable Versions, which defaults to 7 and can be set from 1 to 366. Press Ctrl+A to save the schedule. Pick a time when the PC is switched on but nobody is posting vouchers, such as lunch or early evening. Tally's own advice is to run two schedules, one to a local drive and one to TallyDrive, set to different times so they do not run together.

Backing up with Tally closed vs open

The built-in Backup option is designed to run from inside TallyPrime, so you do not need to shut it down. What you should avoid is copying the numbered company folders in Windows Explorer while TallyPrime has those companies open. Tally keeps files in use, and a raw copy taken mid-write may not open cleanly later.

  • Tally open: use Alt+Y > Backup & Restore > Backup. Ask other users to save their entries first so the backup includes them.
  • Tally closed: once TallyPrime is closed on every computer that uses the data, you can copy the whole company folder as a second, raw copy. Keep it zipped and dated, for example 100000_2026-11-30.zip.

Off-site copies: external drive and encrypted cloud

A backup folder on the same PC protects against a damaged company, not against theft, fire, ransomware or a dead disk. Keep at least one copy elsewhere:

  • External drive: copy the backup folder to a USB drive and unplug it afterwards. Ransomware can encrypt any drive that stays connected. Rotate two drives so one is always away from the office.
  • Encrypted cloud storage: TallyDrive, Tally's own cloud backup, works from inside TallyPrime with a Tally.NET ID and can protect backups with a password and recovery key. If you use a general cloud drive instead, put the backup in an encrypted archive first, for example with 7-Zip and AES-256, and keep the archive password outside the cloud account.

A backup schedule around month-end and filing periods

Daily automatic backups cover normal days. Add manual, clearly named backups at the points where a mistake costs the most:

  • Before and after month-end closing entries and bank reconciliation.
  • Before you start preparing data for a return, and again once it is filed, so you can always see the books as they stood on that date.
  • Before year-end close, any Split Company Data, a TallyPrime upgrade or a Repair.
  • Before importing large batches of vouchers or masters.

Keep month-end backups for at least the full financial year, separately from the rolling daily versions that get overwritten.

How to restore Tally data

  1. Install the same or a later TallyPrime release on the PC.
  2. Press Alt+Y > Backup & Restore > Restore.
  3. Check the Restore Data Path. This is where the company will be written.
  4. Under Primary, choose the folder or drive that holds the backup, or TallyDrive (Cloud Storage).
  5. Select the company and, if a List of Versions appears, the backup date and time you want.
  6. Press Ctrl+A. Enter the TallyVault password or backup password if asked.

In Release 6.2 and earlier, use Alt+Y (Data) > Restore instead. If a company with the same number already exists at the destination, TallyPrime offers Skip or Replace. Replace overwrites that folder, so if you are unsure, restore to a fresh folder instead.

Restoring on a new PC

Install TallyPrime, activate your licence, copy the backup files from your external drive or download them from cloud storage, then restore as above. Afterwards open the company and compare the trial balance and a few ledger closing balances with your last printed or exported figures.

Version compatibility: Tally.ERP 9 to TallyPrime

A backup taken in a higher release will not load in a lower one, so restore in the same release or a newer one. Tally.ERP 9 data from Release 5.0 onwards migrates directly: in TallyPrime press Alt+Y (Data) > Migrate, or F1 (Help) > Troubleshooting > Migrate, and select the company. Take a backup first. Once migrated, the data cannot be opened in Tally.ERP 9, so keep the pre-migration backup until you have checked the migrated books. Data from older products such as Tally 5.4, 6.3 or 7.2 has its own migration route; follow Tally's separate guide for those releases.

Testing restores

Once a month, restore the latest backup to a test folder such as D:\TallyRestoreTest, never over live data. Open it, check the trial balance, the last voucher date and stock values, then delete the test copy. Note the date and result. If a restore fails, you find out on a quiet day, not on the day you need it.

Tally data backup on cloud servers and Bigdomainhost

When TallyPrime runs on a hosted Windows server, the company data sits on that server, not on your office PC, so the provider's server backups do much of the work. With Bigdomainhost Tally on Cloud, TallyPrime runs on a Windows Server instance in Mumbai or Delhi NCR, data is encrypted at rest and stays in India, and the server is backed up nightly with restore points you can browse. You can also take an on-demand backup before year-end close.

Keep your own Tally backups as well. If local drive redirection is turned on in your Remote Desktop connection, your PC's drives appear inside the session, so you can copy backup files from the server to your own PC or external drive. When you move to Tally on Cloud, setup starts from a Tally backup you send, which is restored and checked against your balances; if you leave, you receive the company data folder and a final backup. For the ways of reaching a hosted Tally, see Tally remote access, TallyPrime Cloud Access vs Tally on Cloud and Tally on mobile. For help, call +91 75994 50220 during IST hours, WhatsApp the same number at any time, or email support@bigdomainhost.com.

Sources (checked )

Answers

Frequently asked questions

Still unsure? Call +91 75994 50220 or write to support@bigdomainhost.com — a human replies in IST hours.

How to take backup in Tally Prime?

In TallyPrime Release 7.0 or later, press Alt+Y (Data), choose Backup & Restore, then Backup. Set the Backup Data Path, select one company or All Items, choose End of List and press Enter. In Release 6.2 and earlier, the option is Alt+Y (Data) then Backup. Copy the backup file to another drive afterwards.

How to restore Tally data?

In Release 7.0 or later, press Alt+Y (Data), then Backup & Restore, then Restore (in 6.2 and earlier, Alt+Y then Restore). Check the Restore Data Path, choose the folder, drive or TallyDrive that holds the backup, select the company and version, and press Ctrl+A. If the company already exists there, Replace overwrites it, so restore into a separate folder when in doubt.

Where is the Tally data location on my PC?

It depends on how TallyPrime was installed, so check rather than guess. Press F1 (Help), choose About, and look at Location of Company data. Each company is a numbered folder, such as 100000, inside that path. In Release 7.0 you can change default paths under Alt+Y (Data) then Configuration; in 6.2 and earlier it is Alt+Y (Data) then Data Path Configuration.

Can I restore a TallyPrime backup in Tally.ERP 9?

No. Data from a higher release does not load in a lower one, and migrated TallyPrime data cannot be opened in Tally.ERP 9. Keep the backup you took before migrating until you have checked the migrated books, and restore TallyPrime backups only in the same or a newer TallyPrime release.

How does Tally data backup on cloud work?

There are two kinds. TallyDrive is Tally's own cloud backup, used from inside TallyPrime with a Tally.NET ID. On a hosted Tally on Cloud server, the data lives on the server and the provider backs it up; at Bigdomainhost that is nightly, with restore points you can browse. Keep your own copies too.

Support that picks up the phone.

In IST hours, in Hindi or English, and WhatsApp replies fastest at any time. Sales, migration and emergencies all reach the same engineers. No offshore queue, no 48-hour first reply.

Need cPanel or WHM with the ports already sorted?

Web & cPanel hosting comes with cPanel ready to log in to, reseller hosting adds white-label WHM, and a KVM VPS can have cPanel & WHM pre-installed. Call +91 75994 50220 or email support@bigdomainhost.com.