How Tally multi user works
Tally multi user means several people working in the same TallyPrime company data at the same time. It needs a Gold licence, because Silver is single-user. On an office network, one computer holds the activated licence and usually the company data. The other computers borrow the licence from it over the LAN and open the data from a shared folder. Nobody needs a separate licence for each desk.
Two separate things are shared, and most problems come from mixing them up:
- The licence. It is activated once, on the server computer, and shared through the Tally Gateway Server, which runs on that machine. Client computers are pointed at it.
- The data. The company folder lives on one computer and is shared through Windows file sharing, so every client opens the same files. Larger offices can use TallyPrime Server instead, a separate Tally product that serves the data itself.
Tally Prime multi user setup: quick checklist
- Confirm you have a Gold licence (F1 (Help) > Settings > Manage License shows the edition).
- Choose one always-on computer as the server and activate the licence there, running TallyPrime as Administrator.
- Check that the Tally Gateway Server service is in Running status on that computer (open
services.mscand find Tally Gateway Server). - Share the company data folder with Read/Write access for each user.
- Allow TallyPrime and the Tally Gateway Server through Windows Defender Firewall on the server.
- On each client, point the licence at the server's computer name or IP address and port, then restart TallyPrime.
- On each client, set the company data path to the shared folder and open the company.
- Make sure the server reaches the internet at least once every 30 days, or the licence drops to Educational mode.
Tally Silver vs Gold
Tally Solutions describes Silver as a licence for one user on one machine and Gold as a licence for any number of concurrent users on the same LAN. The difference matters only when two or more people need Tally open at once.
| Silver | Gold | |
|---|---|---|
| Users at the same time | One | Unlimited, within one LAN |
| Use on other office PCs | One machine at a time; close it elsewhere first | All PCs on the LAN, sharing one licence |
| Tally Virtual User (TVU) packs included, for RDP or cloud use | 1 | 10, with more available to buy |
| Remote Access over Tally.NET | One session | Up to 10 concurrent users |
If you already own Silver, Tally offers an upgrade to a Gold licence, so you do not have to start again. Check current prices on tallysolutions.com or with a Tally partner.
Tally network setup, step by step
1. Activate the Tally Gold license on the server computer
Pick the PC that stays on through the working day; Tally says the computer holding the licence should be kept powered on. Install TallyPrime, run it as Administrator and activate the Gold licence. That computer becomes the licence server from then on. Note its computer name and give it a fixed IP address, for example 192.168.1.10, using a DHCP reservation on your router so the address does not change.
2. Share the data folder
Many offices keep company data in a plain path such as D:\TallyData rather than inside the program folder. In File Explorer, right-click the folder, choose Properties > Sharing > Advanced Sharing, tick Share this folder, and give the users Read/Write permission. Then check the Security tab, because Windows applies both the share permissions and the NTFS permissions, and the stricter one wins. You can also create the share from an Administrator command prompt:
net share TallyData=D:\TallyData /GRANT:Everyone,CHANGE
Everyone gives every account that can reach the PC change rights at the share level, so access then depends entirely on the folder's NTFS permissions. Where your office uses individual Windows logins, replace Everyone with those named accounts or a group, and give the same accounts Modify on the Security tab.
3. Point each client at the licence
On each client PC, install TallyPrime but do not activate it. Press F1 (Help) > Settings > Manage License, press F4 and pick the licence shown as Active, or choose Configure License Manually and enter the server's computer name or IP address and the Gateway Server port. Read the port from the server's own licence screen rather than guessing it. Restart TallyPrime when asked.
4. Point each client at the data
Before touching Tally, open \\192.168.1.10\TallyData in File Explorer and create and delete a test file, which proves read and write access. Then in TallyPrime open Alt+Y (Data) > Data Path and set the company data path to the same UNC path. Use the UNC path rather than a mapped drive letter, which can be missing when a different Windows user is signed in.
How to use Tally on multiple computers: common errors
- Licence already in use. On Silver only one instance can run at a time; close Tally on the other PC. On Gold, a client that was activated separately causes conflicts: point it at the server's Gateway instead of reactivating.
- Client opens in Educational mode. Usually wrong server details, a network drop, the server being off, or a firewall block. Tally's help also says the server and clients should be on the same IP subnet. Check the Connectivity and Tally Gateway Server details under F1 (Help) > About on the client, and on the server confirm the Tally Gateway Server service is running in
services.msc. - Cannot reach the data path. Test the share in File Explorer first. "Access is denied" points to share or NTFS permissions; "network path not found" usually means the server is off, the IP has changed, or File and Printer Sharing is turned off or blocked by the server's firewall.
- Company opened two ways. If you move to TallyPrime Server, stop sharing the folder through Windows, so nobody opens the same company over the share at the same time.
Test basic reachability from a client with:
ping 192.168.1.10
net view \\192.168.1.10
Windows Defender Firewall can block ping even when sharing works, so a failed ping is not proof the server is down. In PowerShell, Test-NetConnection 192.168.1.10 -Port 445 checks the file-sharing port directly.
Using Tally multi user from outside the office
A Gold licence is meant for one LAN. Tally's licensing FAQ says it is not supported on a LAN created by, or connected through, a VPN, so a branch cannot simply join the office network over a VPN and borrow the licence. Tally permits use outside the LAN through Tally Virtual User packs or Tally.NET Remote Access. The practical routes are:
| Route | Where Tally runs | Main conditions |
|---|---|---|
| TallyPrime Remote Access (Tally.NET) | Office PC, data stays there | Active TSS; no backup, restore or import while remote |
| Remote Desktop to an office PC | Office PC | Windows Pro or higher; uses a TVU; PC must be on |
| TallyPrime Cloud Access | A virtual computer run by Tally Solutions | Valid TallyPrime licence moved to the virtual computer |
| Tally on a hosted Windows server | Windows Server in a data centre | Your own licence, TVUs for remote users, RDS licensing |
Each route is covered in more detail in Tally remote access: four ways, and the two cloud options are compared in TallyPrime Cloud Access vs Tally on Cloud.
Remote Desktop session limits and RDS CALs
A Windows desktop such as Windows 11 Pro allows one Remote Desktop session at a time, so it does not suit a team. Windows Server without the Remote Desktop Session Host role allows two sessions, and they are meant for administration. For more users, Microsoft requires the Session Host role and a Remote Desktop Services client access licence (RDS CAL) for each user or device. There is a 120-day grace period, after which sign-ins fail without a licence server. On the Tally side, virtual use over RDP counts against TVU packs; same-company users on one RDP server are allowed, but serving users of different companies breaks Tally's licence terms. Confirm your exact licence count with a Tally partner before you move.
Security: never open RDP to the internet
- Do not forward port 3389 from your router to an office PC. Exposed RDP is one of the most common ways attackers get in.
- Put Remote Desktop behind a VPN, or restrict it to known IP addresses at the firewall.
- Turn on two-factor authentication for the VPN, and for your Tally.NET and Windows accounts where available.
- Give each person their own Windows login and Tally user, and remove accounts when staff or auditors leave.
- Keep backups off the server computer, and test a restore.
Running Tally for several users on Bigdomainhost
If your team works from more than one place, Tally on Cloud moves TallyPrime off the office PC. Bigdomainhost sets up a Windows Server 2019 or 2022 machine in Mumbai or Delhi NCR, installs TallyPrime, restores your company data from your backup, checks the balances and creates one Remote Desktop user per person. Windows Server and Remote Desktop are included; your Tally licence is your own, as Bigdomainhost does not sell or rent Tally licences. Silver stays single-user, so several people at once still need Gold. Plans are sized by how many people use Tally at the same time.
Remote Desktop accepts connections only from IP addresses you nominate, the server is single-tenant, data stays in India and there are nightly backups. If you would rather build it yourself, a KVM VPS can run Windows. Call +91 75994 50220 during IST hours, WhatsApp the same number at any time, or email support@bigdomainhost.com.
Sources (checked )
- Tally Solutions: Buy TallyPrime: Silver and Gold editions
- TallyHelp: Licensing best practices
- TallyHelp: Configure license from network
- TallyHelp: Licensing FAQ and errors in TallyPrime
- TallyHelp: Share data from your Windows computer
- TallyHelp: Tally Virtual User (TVU) FAQ
- Microsoft: Windows Server licensing